Heat substation ITPS
How to connect in fast and economic
manner to the district heating system as well as to use on rational way a space for
installation – the best solution is compact heat substation type ITPS.
Application of ITPS heat substation is for
the following:
- direct or indirect mode of operation
- warm and hot water, low-pressure and
high-pressure steam
- capacity: 10 – 4000 kW
- all usual temperature and pressure range in
district heating system
- with or without preparation of sanitary
water
- one or more circles of heating and
preparation of sanitary water
The ITG is produces and delivers heat
substations, which correspond to different requests of customers. Their designs comply
with all valid norms and standards in this field of technic. All built-in parts were
chosen on the base of strict requests EN ISO 9001.
Technical documentation:
- Process flow sheet
- Arrangement of the device elements
- Guarantee
- Instructions for operation
- Functional test report
To order the following data are
necessary:
- capacity of the heat exchanger
........................................................kW
- operating medium: primary/secondary
............................/..................
- operating pressure: primary/secondary
....................../......................bar
- operating temperature primary/secondary
.................../.....................oC
- flow of warm water .........m3/h
or volume of boiler ........m3, temperature ......oC
- expansion
.....................................................................................m3
- chemical treatment of water
No/Yes ...........................................m3
|
